BP100 Belt Pack

MS 200 2-Kanal-Hauptstation Front View

MS 200 2-Kanal-Hauptstation Rear view

portable one channel intercom station

The belt pack BP 100 is a portable 1 channel intercom station for connection to a main station MS 200. The integrated spring steel clip allows for easy fixing the unit to clothes. All controls on the front side of the unit are identical to those on the main station.

On the rear of the unit all XLR connectors are easily accessible (left on photo the 4 pin XLR connector for the headset and on the right the 3 pin XLRs for signal loop-through to the next station). The side tone is adjustable. Nearly all features are identical to those on the main station. The BP 100 features light and sound alarm. The sound alarm is switchable.

 

BP100 V Belt Pack Vibration

MS 200 2-Kanal-Hauptstation front view

portable one channel intercom station

The belt pack BP 100 V is a portable 1 channel intercom station for connection to a main station MS 200. The integrated spring steel clip allows for easy fixing the unit to clothes. All controls on the front side of the unit are identical to those on the main station. On the rear of the unit all XLR connectors are easily accessible (left on photo the 4 pin XLR connector for the headset and on the right the 3 pin XLRs for signal loop-through to the next station).

The side tone is adjustable. Nearly all features are identical to those on the main station.

The BP 100 V features light alarm and a connection for an external vibration alarm module (only 5 x 4 x 2 cm). The connection cable has a length of 80 cm and is equipped with a mini phone plug. The “Vibro Alarm” comes in handy, when the light alarm is not recognized by any reason. The BP 100V is compatible to other common Partyline intercom systems.

VP 100 Vibration Alarm Module

RS-1 Netzteil

Vibration Alarm Module

The axxent Vibration Alarm Module VP100 is a small ABS plastic box with a vibration element inside. The box measures 50 mm to 40 mm to 20 mm and is very light weight. Its connection cable is 80 cm long and it plugs into the belt packs BP101 or BP100V via a 3.5 mm phone plug.

 

Preço sob consulta

BP101 Belt Pack

MS 200 2-Kanal-Hauptstation Front view

MS 200 2-Kanal-Hauptstation Rear View

portable single channel intercom station

The belt pack BP-101 is a portable single channel intercom station. It is compatible to common Party Line Intercom Systems.

All controls on the front side of the unit are identical to those on the main stations. Knob on right side is headset volume. The side tone is adjustable via slotted screwdriver. The talk switch has three positions: Middle is Off, Top is momentary “Push to Talk”, Down is Talk (On). The BP-101 features light and sound alarm. Illuminated yellow pushbutton has the CALL function. The sound alarm is switchable.

BP-101 features a connection (3.5 mm socket on left side of front panel) for external “vibration alarm module”. When the plug of an external “vibro alarm module” is inserted, the internal buzzer is automatically disabled.

The “CALL Signalling” has two modes of indication (selectable via recessed switch on left side of front panel):

Extended Mode (Lever Down): CALL Signal is pulsing and extended, ~ 4 seconds.

Instant Mode (Lever Up): Indication follows the CALL Signal on the Line. Then duration of the CALL Signal means the ATTENTION. End of CALL Signal means the Start of the Action.

Three XLR connectors are easy accessible on the rear side of the BP-101 (the 4-pin XLR connector for the headset and 3-pin XLRs for Party Line). The integrated spring steel clip allows for easy fixing the unit to trouser belts.

Technical Specifications

Frequency Response Mic: 160 Hz to 20 kHz/ – 6 dB, shaped for better intelligibility Rep: 220 Hz to 15 kHz/ ± 6 dB
THD + N <0,1 %
Signal to Noise Ratio >80 dB
Connectors 3 and 4 pin XLR, 3,5 mm socket
Power Requirements 20 – 30 VDC
Current Consumption < 30 mA, idle <100 mA, in use
Dimensions W = 80 mm, L = 125 mm, H = 40 mm
Weight 324 gramms

 

 

Marcas